A wide selection of attachments, cables, adapters, and other accessories are available for Mark-10 force gauges, torque gauges, test stands, and sensors.

Accesorios

Power and Communication

Hardware

Test Stand Accessories

Calibration Kits

Mark-10 Footswitch For Series 7 Force Gauges / M7i Indicator

Automates common force gauge and indicator functions for improved testing ergonomics and efficiency, eliminating the need for multiple key presses. Up to three functions, separated by configurable time delays, may be programmed for a single footswitch activation. Applicable commands include: Request currently displayed reading Request real-time...

En Stock

$3,700.64
$202.00 USD

08-1026 F Gauge/ T Gauge Rechargeable Battery

For use with all Mark-10 force gauges and torque gauges powered by rechargeable batteries. Note: The 08-1006 battery, which was used with legacy Mark-10 gauges (Series BG, BGI, EG, and CG), is no longer available. The 08-1026 battery may be used instead, however, some gauge modifications are required to ensure proper charging characteristics. The gauge...

En Stock

$586.24
$32.00 USD

Mark-10 Adapter for FS05

Adapts a Series FS05 force sensor or PTAF sensor adapter to Plug & Test® type interface, for ease of external calibration via a Mark-10 indicator. Also permits mounting of a Series FS05 sensor to Models F755, F755S, F1505, and F1505S test frames.

En Stock

$7,089.84
$387.00 USD

Communication Adapters

For converting USB, RS-232, and Mitutoyo communication. Select RSU100 to convert RS-232 to USB or MU100 to convert Mitutoyo to USB.

$2,693.04
$147.00 USD

Mark-10 Inline Adapters for Force Gauges

AC1073 These adapters allow a force gauge to be used in inline pull testing or weighing applications. A 5/16-18 threaded hole at each end is axially aligned with the load cell shaft in the force gauge, for mounting hooks or other attachments. Three adapters are offered, accommodating Mark-10 force gauges with capacities up to 500 lbF (2.5 kN).

En Stock

$2,235.04
$122.00 USD

Mark-10 Communication Cables

Various cables are available for communicating between Mark-10 gauges, indicators, test stands, PCs, printers, PLCs, and other devices.

En Stock

$2,693.04
$147.00 USD

Mark-10 Tabletop Stand For Indicators & TT03

Accommodates any Mark-10 indicator or Series TT03 torque gauge (indicator portion). Features an angle adjustment to optimize the viewing angle. Note: For indicator positioning only. It should not be used to support a force gauge or torque sensor in a load-bearing application.

El producto sera enviado en 2 semanas

$0.00
$0.00 USD

Mark-10 AC Adapters

AC1030 Several universal AC adapters / chargers for Mark-10 force gauge and torque gauges are available, each of which consists of a body and replaceable prong. Spare prongs are also available.

En Stock

$1,044.24
$57.00 USD

Mark -10 Force Gauge Mounting Plate Kits

These universal mounting plate kits are suitable for all Mark-10 force gauges in OEM and custom mounting applications. The plates feature an integrated dowel pin, which mates with the blind hole in the rear of Mark-10 force gauge housings. Note: Gauge mounting plates are included with Mark-10 test stands.

En Stock

$1,227.44
$67.00 USD

Mark-10 Competitor Force Gauge / Test Stand Mounting Kits

A wide range of adapters are available to mount competitor gauges to Mark-10 test stands, and Mark-10 gauges to competitor test stands. Note: When ordering models AC1020 through AC1025 with an ES10 or ES20 test stand, the optional AC1060 mounting plate is suggested. This ensures axial alignment between the force gauge loading shaft and the threaded holes...

En Stock

$2,051.84
$112.00 USD

Mark-10 Axial Compensator

Designed to compensate for axial movement in torque tests of threaded fasteners, bottle caps, etc. The axial compensator has a hex tail which fits into the chuck of a Series R50 or TT03 torque gauge, and includes mounting hardware to mount to a G1053 or G1058 grip.

En Stock

$4,433.44
$242.00 USD

Mark-10 Torque Sensor - Test Stand Mounting Kits

For securing Series R51 and Series R55 torque sensors to Series TST torque test stands.

En Stock

$1,410.64
$77.00 USD

Mark-10 View All Indicator / Load Cell Mounting Kit For ESM303

For securing any Mark-10 indicator and Series R01 or R03 force sensor to a Mark-10 ESM303 force test stand. The kit consists of brackets and hardware. Indicator-test stand interface cable is not included.

En Stock

$4,616.64
$252.00 USD

Mark-10 Force Sensor - Test Stand Mounting Kit

For securing any Series R01 or R03 force sensor to any of the following Mark-10 force test stands: - ES10 / ES20- ES30- TSA750 / TSA750H- TSC1000 / TSC1000H- TSF / TSFH The kit contains brackets and screws with the following thread sizes: #10-32, 1/4-28, 5/16-18, 1/2-20

En Stock

$2,235.04
$122.00 USD

Mark-10 Double column extensions

Accommodate up to a 20 in. [508 mm] wide sample, or ø21.5 in [ø546 mm] round sample. Three heights are available – 6, 12 and 24 in [150, 300, and 600 mm]. Base contains rows of T-slots, with available fixture mounting plates. Compatible with: Models F105 / F305 / F505 test frames - these test frames include a base plate with matrix of threaded holes,...

En Stock

$34,258.40
$1,870.00 USD

Mark-10 Shields

AC1086, AC1086-1 These shields attach to the following test frames: F105, F305, F505, and ESM303. The shields provide pinch and sample debris protection for the operator. The shields are constructed of rugged PETG material. They rotate via ultra-smooth bearings in both the clockwise and counter-clockwise directions, guided into the open or...

En Stock

$45,800.00
$2,500.00 USD

Mark-10 Shields for Test Frames

Provides pinch and sample debris protection for the operator. An electrical interlock prevents test frame operation while the door is open. The test frame’s control panel and remote emergency stop (applicable models, only) mount to the shield’s extruded frame. See Compatibility tab to select an appropriate shield for your test frame.

En Stock

$43,052.00
$2,350.00 USD

Mark-10 USB Hub

Test frame-mounted 4-port USB hub improves cable management and conveniently accommodates peripherals, such as a flash drive, barcode scanner, etc. Compatible with all Series F test frames.

En Stock

$5,166.24
$282.00 USD

Mark-10 Calibration Kit For Cap Torque Testers

This calibration kit is designed to permit the field calibration of any Series TT01 torque tester, as well as legacy Series CTA and CT. The kit contains a complete set of attachments required to mount the tester to a bench, as well as the necessary brackets and cable to mount weights.

En Stock

$12,952.24
$707.00 USD

Mark-10 Calibration Kit for Wire Crimp Pull Testers

This calibration kit is designed to permit the field calibration of a WT3-201, WT3-201M, or WT3-200 wire crimp pull tester. The kit contains a complete set of attachments required to mount the tester to a bench, as well as the necessary brackets to mount weights.

En Stock

$16,891.04
$922.00 USD